[System09] CF_XESS Utility for the XESS XSA-3S1000

[John Kent]

David

Here is the CF_UTIL program re-written for the 16 bit IDE interface on 
the XSA-3S1000 and XST-3.0
Note that the utility no longer attempts to set the feature register so 
should work with a conventional IDE hard disk.
I've included a 256 bytes pause so you can see the first half of the 
sector before it scrolls off the screen.

The utility resides at $0100, is a bit under 2 KBytes long and has a 512 
byte sector buffer.

Load the utility with the monitor "L" command and dump the S19 file as a 
straight text file via the serial port.

Set the Program counter with the start address of $0100
<CTRL> P 0100

And start execution from the Program counter
G

John.

-- 
http://www.johnkent.com.au
http://members.optushome.com.au/jekent

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cf_xess.a09
Url: http://lists.bknr.net/pipermail/system09/attachments/20080201/41a98d25/attachment-0003.ksh 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cf_xess.lst
Url: http://lists.bknr.net/pipermail/system09/attachments/20080201/41a98d25/attachment-0004.ksh 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: CF_XESS.S19
Url: http://lists.bknr.net/pipermail/system09/attachments/20080201/41a98d25/attachment-0005.ksh